The pump starts every few seconds
Repeated starts while a faucet is running can mean the tank is waterlogged, low on air, or not holding pressure the way it should.
For Hill Country well homes
Well pressure tank repair that starts with the real problem.
Low pressure, a pump that clicks on and off, or no water at all can bring a house to a stop. Brauntigam Plumbing checks the tank, pressure switch, and the rest of the system before recommending a repair or replacement.
Call the shop (830) 555-0127$85 service call. You will know the price for the job before work starts.
Steady water starts here
When the pressure changes, the whole system deserves a look.
A pressure tank gives your well pump breathing room. It stores water under pressure, so the pump does not have to start every time someone opens a faucet. When the tank, its air charge, or the controls around it stop doing their job, you may notice pulsing water, a weak shower, a clicking pump, or a house that suddenly has no water.
The tank is not always the cause. A plugged filter, water treatment equipment, a pressure switch, a leak, or the pump itself can make water feel unreliable. We look at the system as a whole, explain what we found in plain terms, and recommend only the work that addresses it.
What homeowners notice first
Signs it is time to call about a well pressure tank.
Pressure surges, then fades
A shower that starts strong and then weakens, or faucets that sputter, can point to a tank or control problem that needs a proper diagnosis.
The tank is leaking or rusting
Water at fittings, corrosion at the base, or water coming from the tank air valve are all reasons to stop guessing and arrange service.
The pump will not shut off
A pump that runs for a long time without reaching pressure may be dealing with a leak, well-supply issue, control trouble, or pump problem.
A straight diagnosis
We test before we replace.
Pressure trouble does not automatically mean you need a new tank. We start with the visible facts: how the gauge behaves, when the pump starts and stops, whether the tank is holding air, and whether the pressure switch and nearby piping are doing what they should.
If the tank is sound and the issue can be corrected without replacement, we will say so. If a bladder has failed, the tank is corroded, or it no longer holds pressure, we will explain why replacement is the practical fix. The tank needs to match the pump and the home’s water use, not simply be the next size on a shelf.
Once we complete the repair, we check that the system is building pressure and cycling normally. You should leave the visit with water that feels steady and a clear understanding of the work performed.
A tank that fits the job
Replacement is not a one-size-fits-all answer.
A pressure tank should work with the pump already serving the house. A tank that is too small can leave the pump starting too often. A tank that is too large may take up space and money without solving the reason the system is behaving poorly. The right choice depends on the pump, the controls, the plumbing arrangement, and how the household uses water.
We also look at the equipment around the tank. A switch that is not reading correctly, a fitting that is leaking, or treatment equipment that restricts flow can make a new tank seem like a cure when it is not. That is why the service starts with diagnosis, then moves to a repair plan you can understand. If a replacement is the sensible route, you will know what is being changed and why before the work begins.
What the visit covers
More than a look at one tank.
A good repair starts by separating the symptom from the source.
Pressure tank check
We look for a waterlogged tank, a lost air charge, a failed bladder, leaks, corrosion, and fittings that no longer seal properly.
Pressure-switch and gauge check
We check how the controls are responding. This helps distinguish a tank problem from a switch, gauge, or sensing issue.
Water-flow and treatment check
Filters, softeners, reverse-osmosis equipment, and valves can affect the water at the fixture even when the tank is working properly.
Clear repair options
Before work starts, we explain the sensible path forward and the price. No vague diagnosis and no surprise work.
Built for the water here
Hill Country wells are not a side job for us.
Homes outside town often rely on a private well, a pressure tank, and some form of water treatment. In Fredericksburg, Stonewall, Comfort, Kerrville, and Johnson City, we see the mix of pressure tanks, softeners, under-sink reverse osmosis, old lines, and rural plumbing that can make a small water problem feel bigger than it is.
That local familiarity matters when pressure drops. A tank may be part of the answer, but so can hard-water buildup, a filter that is overdue, a switch that is not responding, or a system that needs a closer look. We help homeowners sort it out without jumping straight to a replacement.
See our well and water services →Before we arrive
Useful notes, no risky tinkering.
If you are waiting for a visit, notice whether the pump is clicking rapidly, running continuously, or not running at all. A photo of the gauge while water is running can help. You can also note whether every fixture is affected and whether a filter or softener has recently changed.
Leave the electrical side alone. Do not open the pressure-switch cover, adjust electrical controls, or change settings in an attempt to force the pump to run. If there is no water, a tripped breaker, or a pump that will not stop, call the shop and tell us what you are seeing.
Talk with the shopCommon questions
Well pressure tank repair, explained plainly.
Why does my well pump keep turning on and off?
Rapid starts and stops, often called short-cycling, can happen when a pressure tank has lost its air charge or its bladder has failed. A pressure switch, leak, or another well-system issue can create a similar symptom, so the tank, controls, and water flow need to be checked together.
Can a well pressure tank be repaired?
Sometimes. If the tank itself is sound and the issue is a lost air charge or a small component around it, a repair may be the right answer. A leaking, badly rusted, or failed bladder tank usually needs replacement. We explain what we find before work begins.
Should I replace my pressure tank if water pressure is low?
Not automatically. A clogged filter, water softener, partly closed valve, pressure switch, pump, or leak can also affect pressure. We look for the actual cause before recommending a tank replacement.
What should I do if the house has no water?
Call the shop. Avoid opening the pressure-switch cover or changing electrical settings. If you can safely identify the pump breaker, leave the electrical side alone and tell us whether the pump is running, quiet, or repeatedly tripping the breaker.
Pressure trouble at the house?